Products

Cartoon Ultrasonic Sensor Mounting Bracket For HC-SR04 Specifically designed for the HC-SR04 Ultrasonic Sensor Module, with this Ultrasonic Sensor Mounting Bracket you can attach the Hc-SR04 module to your application such as small robots or DIY projects very quickly and conveniently. Features/Specs: Material: Acrylic...

CD4001 NOR gates provide the system designer with direct implementation of the NOR function and supplement the existing family of CMOS gates. All inputs and outputs are buffered. The CD4001 types are supplied in 14-lead hermetic dual-in-line ceramic packages (F3A suffix). Features:- Propagation delay...

CD4007 IC is comprised of three n-channel and three p-channel enhancement-type MOS transistors. The transistor elements are accessible through the package terminals to provide a convenient means for constructing the various typical circuits. More complex functions are possible using multiple packages. Numbers shown in...

CD4008 types consist of four full adder stages with fast look ahead carry provision from stage to stage. Circuitry is included to provide a fast “parallel-carry-out” but to permit high-speed operation in arithmetic sections using several CD4008's. CD4008 inputs include the four sets of...

CD4008 types consist of four full adder stages with fast look ahead carry provision from stage to stage. Circuitry is included to provide a fast “parallel-carry-out” but to permit high-speed operation in arithmetic sections using several CD4008's. CD4008 inputs include the four sets of...

CD4009 Hex Buffer/Converters may be used as CMOS to TTL or DTL logic-level converters or CMOS high-sink-current drivers. The CD4009 types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages (E suffix). Features:- 100% tested for quiescent current at...

CD4010 Hex Buffer/Converters may be used as CMOS to TTL or DTL logic-level converters or CMOS high-sink-current drivers. The CD4010 types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages (E suffix). Features:- 100% tested for quiescent current at...

CD4010 Hex Buffer/Converters may be used as CMOS to TTL or DTL logic-level converters or CMOS high-sink-current drivers. The CD4010 types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages (E suffix). Features:- 100% tested for quiescent current at...

CD4011 NAND gates provide the system designer with direct implementation of the NAND function and supplement the existing family of CMOS gates. All inputs and outputs are buffered. The CD4011 type are supplied in 14-lead hermetic dual-in-line ceramic packages (F3A suffix), 14-lead dual-in-line plastic...

The NAND gate is monolithic complementary MOS (CMOS) integrated circuits. The N- and P-channel enhancement mode transistors provide a symmetrical circuit with output swings essentially equal to the supply voltage. This results in high noise immunity over a wide supply voltage range. No DC...

The CD4013 device consists of two identical, independent data-type flip-flops. Each flip-flop has independent data, set, reset, and clock inputs and Q and Q outputs. These devices can be used for shift register applications, and, by connecting Q output to the data input, for counter and toggle applications....

The CD4013 device consists of two identical, independent data-type flip-flops. Each flip-flop has independent data, set, reset, and clock inputs and Q and Q outputs. These devices can be used for shift register applications, and, by connecting Q output to the data input, for counter and toggle applications....

The CD4016 is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4066B. Features:- Wide supply voltage range: 3V to 15V  Wide range of digital and analog switching: ±7.5 VPEAK  “ON” resistance for...

The CD4016 is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4066B. Features:- Wide supply voltage range: 3V to 15V  Wide range of digital and analog switching: ±7.5 VPEAK  “ON” resistance for...

The CD4016 is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4066B. Features:- Wide supply voltage range: 3V to 15V  Wide range of digital and analog switching: ±7.5 VPEAK  “ON” resistance for...

CD4440 / LA4440 is a Stereotype audio amplifier IC with an inbuilt dual channel that enables it for stereo and bridge amplification applications. It gives 6W output in dual mode and 19W in bridge mode. This IC has inbuilt over power protection, small residual...

CD74HP4067 High Speed CMOS 16-Channel Analog/Digital Multiplexer Breakout Module The CD74HP4067 High-Speed CMOS 16-Channel Analog/Digital Multiplexer Breakout Module serves as a breakout board for the versatile 16-Channel Analog/Digital Multiplexer. This chip acts akin to a rotary switch, internally directing the common pin (COM in...

CH340 is a series of USB bus adapters, that provides serial, parallel or IrDA interfaces over the USB bus (note: CH340G supports serial interface only). The CH340G integrate circuit provides common MODEM signals to allow adding a UART to a computer or converting existing...

CJMCU TCA9548A I2C 8 Channel Multiple Extensions Development Board Features 5V Tolerant Inputs. Supports Hot Insertion. I2C Bus and SMBus Compatible. Low Standby Current. 1-to-8 Bidirectional Translating Switches. Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II. Active-Low Reset Input. Power Up With All...

This is CNC shield v3 engraving machine 3D Printer A4988 DRV8825 driver expansion board. The CNC Shield V3.0 allows you to build a engraving machine, 3D printer, mini CNC and other similar devices using your Arduino. It is designed as a shield and can...

Features: Low noise Low power consumption Suitable for a wide variety of Electronic products Multi-channel High signal to noise ratio High resistance to vibration

CR2032 Coin Battery Socket Holder, a Plastic Holder small size, easy to carry, save power and protect environment With the CR2032 General Button Battery Holder Case, best for Soldering /Connecting CR2032 Holder Generally used for holding 3v Lithium coin batteries. PCB mountable 3v Battery...

This is a CR2032 Coin Cell Battery Holder Case Box 2x3V with Wire Lead ON-Off Switch. It holds two CR2032 coin batteries. This product is known as CR2032 Battery Holder Top, CR2032 Battery Holder, CR2032 Coin Cell Holder. Features: Easy to install. Lightweight, convenient...

Crystal Oscillator is an Electronics Oscillator circuit which uses the mechanical resonance of a vibrating crystal of piezoelectric material to generate an electrical signal with an accurate frequency. It also has automatic amplitude control and frequency drift is also very low due to change in temperature. Crystal Oscillators are only suitable...

Technical Specifications Product Type: Cutting Tool Set Quantity: 6 Pieces Compatible Motors: 775 DC Motor, 555 DC Motor Material: Metal Cutting Blades Shaft Compatibility: Suitable for mini drill / rotary tool shafts Usage Type: Cutting, grinding, DIY machining Installation: Screw / Shaft Mount Application:...

Micro DC 3-6V Micro Submersible Pump Mini water pump For Fountain Garden Mini water circulation System DIY project. This is a low cost, small size Submersible Pump Motor which can be operated from a 3 ~ 6V power supply. It can take up to...

DC Power Jack Male connector 2.1×5.5mm This male DC barrel plug features a 5.5mm outer diameter and 2.1mm inner pin, which is the most commonly used size for low-voltage DC power systems.It ensures a tight and reliable fit with standard 2.1mm female DC jacks,...

This is DC Power Jack Male Connector with 2 pin Screw Terminal - 2.1 x 5.5mm Connector Plug For CCTV Camera. Simple & Professional appearance for power cabling. Easier for camera installation saves time and assures secure cable connection.No electrical tap, No splicing, no crimping, but...

Small DC Toy Motor - Small Single Shaft High RPM DIY Electric Motor for Toy Car, Ships, Small Fan Toy Small Motor 3-6V DC is a small motor usually use in toys or Arduino projects for running as a base motor with a 5v...

DC-005 DC Power Jack Female Adapter PCB Mount - 2.1 x 5.5mm is a good quality power connector compatible with all 5.5 male power jack from different sources. It is 2.1 x 5.5mm PCB mountable jack widely used in DIY hobby projects as well as...

DC5V Humidifier USB Spray Module DIY Incubation Experiment 108KHz The DC5V Humidifier USB Spray Module, designed for DIY Incubation Experiments, operates at a frequency of 108kHz. It is specifically tailored for projects that require precise humidity control, such as incubation experiments or plant growth...